SEBO Vacuum Cleaners

If you are like many who have purchased a vacuum to discover a year later that it is not working correctly and that will spend more time in the shop, or you can’t fix it because the part that is needed is no longer available, which leads to you having to purchase another vacuum which means the vacuum is adding to the landfilled maybe it’s time to buy the last vacuum you’ll ever need SEBO Vacuums to have been built to provide many years of flawless service and when comes to changing the most straightforward part you can be assured that it will be available all wear items are easy to replace with no tools needed and as an added benefit all SEBO Vacuums are backed by there 10/10/7 warranty

Bags are Better! Top-fill, three and four-layer bags are an integral part of SEBO’s filtration system because they hold virtually all dirt captured by the vacuum, which improves the effectiveness and useful life of the micro filters. They also ensure continuously strong suction because dirt enters from the top, deposits at the bottom, accumulates upward, and air exits through the sides, which allows unimpeded airflow as they fill to capacity. And they can be sealed when full, so no dust can escape into the air during bag removal and disposal.

In contrast, without bags to hold nearly all the captured dirt, the microfilters on bagless vacuums quickly clog from excessive dirt build-up and must be replaced often, or a loss of suction and cleaning effectiveness will occur. In addition, dust and other allergens become airborne when emptying bag-less dirt containers. Lastly, bag-less vacuum micro-filters are expensive, usually costing more than a multi-year supply of SEBO filter bags.

S-class Pre-motor Microfilters – S-class Pre-motor Microfilters (S = “Schwebstoff” = airborne particles) are made from electrostatically charged micro-fiber material, which attracts and captures dust particles from the airflow of the vacuum before it passes over the motor to cool it. Cooling the motor with super-clean air increases motor life and reduces the possibility of maintenance, even after many years of use. The S-class Standard requires filters to absorb greater than 99.9% of particles down to 0.3 microns in diameter. For comparison, 100 microns is the diameter of a human hair.